 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 110RKI...PbF/111RKI...PbF Series Vishay High Power Products Phase Control Thyristors (Stud Version), 110 A FEATURES * High current and high surge ratings * Hermetic ceramic housing * RoHS compliant * Lead (Pb)-free * Designed and qualified for industrial level TO-209AC (TO-94) RoHS COMPLIANT TYPICAL APPLICATIONS PRODUCT SUMMARY IT(AV) 110 A * DC motor controls * Controlled DC power supplies * AC controllers MAJOR RATINGS AND CHARACTERISTICS PARAMETER IT(AV) IT(RMS) 50 Hz ITSM 60 Hz 50 Hz 60 Hz VDRM/VRRM tq TJ Typical TEST CONDITIONS VALUES 110 TC 90 172 2080 2180 21.7 19.8 400 to 1200 110 - 40 to 140 V s C kA2s A UNITS A C I2 t ELECTRICAL SPECIFICATIONS VOLTAGE RATINGS TYPE NUMBER VOLTAGE CODE 40 110RKI 111RKI 80 120 VDRM/VRRM, MAXIMUM REPETITIVE PEAK AND OFF-STATE VOLTAGE V 400 800 1200 VRSM, MAXIMUM NON-REPETITIVE PEAK VOLTAGE V 500 900 1300 20 IDRM/IRRM MAXIMUM AT TJ = TJ MAXIMUM mA Document Number: 94379 Revision: 11-Aug-08 For technical questions, contact: ind-modules@vishay.com www.vishay.com 1 110RKI...PbF/111RKI...PbF Series Vishay High Power Products Phase Control Thyristors (Stud Version), 110 A ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average on-state current at case temperature Maximum RMS on-state current SYMBOL IT(AV) IT(RMS) TEST CONDITIONS 180 conduction, half sine wave DC at 83 C case temperature t = 10 ms Maximum peak, one-cycle non-repetitive surge current ITSM t = 8.3 ms t = 10 ms t = 8.3 ms t = 10 ms Maximum I2t for fusing I2 t t = 8.3 ms t = 10 ms t = 8.3 ms Maximum I2t for fusing Low level value of threshold voltage High level value of threshold voltage Low level value of on-state slope resistance High level value of on-state slope resistance Maximum on-state voltage Maximum holding current Typical latching current I2t VT(TO)1 VT(TO)2 rt1 rt2 VTM IH IL No voltage reapplied 100 % VRRM reapplied No voltage reapplied 100 % VRRM reapplied VALUES 110 90 172 2080 2180 1750 Sinusoidal half wave, initial TJ = TJ maximum 1830 21.7 19.8 15.3 14.0 217 0.82 1.02 2.16 1.70 1.57 200 400 kA2s V kA2s A UNITS A C t = 0.1 to 10 ms, no voltage reapplied (16.7 % x x IT(AV) < I < x IT(AV)), TJ = TJ maximum (I > x IT(AV)), TJ = TJ maximum (16.7 % x x IT(AV) < I < x IT(AV)), TJ = TJ maximum (I > x IT(AV)), TJ = TJ maximum Ipk = 350 A, TJ = TJ maximum, tp = 10 ms sine pulse TJ = 25 C, anode supply 6 V resistive load m V mA SWITCHING PARAMETER Maximum non-repetitive rate of rise of turned-on current Typical delay time Typical turn-off time SYMBOL dI/dt td tq TEST CONDITIONS Gate drive 20 V, 20 , tr 1 s TJ = TJ maximum, anode voltage 80 % VDRM Gate current 1 A, dIg/dt = 1 A/s Vd = 0.67 % VDRM, TJ = 25 C ITM = 50 A, TJ = TJ maximum, dI/dt = - 5 A/s VR = 50 V, dV/dt = 20 V/s, gate 0 V 25 VALUES 300 1 s 110 UNITS A/s BLOCKING PARAMETER Maximum critical rate of rise of off-state voltage Maximum peak reverse and off-state leakage current SYMBOL dV/dt IRRM, IDRM TEST CONDITIONS TJ = TJ maximum linear to 80 % rated VDRM TJ = TJ maximum rated VDRM/VRRM applied VALUES 500 20 UNITS V/s mA www.vishay.com 2 For technical questions, contact: ind-modules@vishay.com Document Number: 94379 Revision: 11-Aug-08 110RKI...PbF/111RKI...PbF Series Phase Control Thyristors (Stud Version), 110 A TRIGGERING PARAMETER Maximum peak gate power Maximum average gate power Maximum peak positive gate current Maximum peak positive gate voltage Maximum peak negative gate voltage SYMBOL PGM PG(AV) IGM + VGM - VGM TJ = - 40 C DC gate current required to trigger IGT TJ = 25 C TJ = 140 C TJ = - 40 C DC gate voltage required to trigger VGT TJ = 25 C TJ = 140 C DC gate current not to trigger IGD TJ = TJ maximum DC gate voltage not to trigger VGD Maximum gate current/voltage not to trigger is the maximum value which will not trigger any unit with rated VDRM anode to cathode applied Maximum required gate trigger/current/voltage are the lowest value which will trigger all units 12 V anode to cathode applied 180 80 40 2.5 1.6 1 6.0 TJ = TJ maximum, tp 5 ms TEST CONDITIONS TJ = TJ maximum, tp 5 ms TJ = TJ maximum, f = 50 Hz, d% = 50 VALUES TYP. MAX. 12 3.0 3.0 20 10 120 2 mA V mA UNITS Vishay High Power Products W A V 0.25 V THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER Maximum operating junction temperature range Maximum storage temperature range Maximum thermal resistance, junction to case Maximum thermal resistance, case to heatsink SYMBOL TJ TStg RthJC RthCS DC operation Mounting surface, smooth, flat and greased Non-lubricated threads Mounting torque, 10 % Lubricated threads Approximate weight Case style See dimensions - link at the end of datasheet TEST CONDITIONS VALUES - 40 to 140 - 40 to 150 0.27 0.1 15.5 (137) 14 (120) 130 UNITS C K/W N*m (lbf * in) g TO-209AC (TO-94) RthJC CONDUCTION CONDUCTION ANGLE 180 120 90 60 30 SINUSOIDAL CONDUCTION 0.043 0.052 0.066 0.096 0.167 RECTANGULAR CONDUCTION 0.031 0.053 0.071 0.101 0.169 TJ = TJ maximum K/W TEST CONDITIONS UNITS Note * The table above shows the increment of thermal resistance RthJC when devices operate at different conduction angles than DC Document Number: 94379 Revision: 11-Aug-08 For technical questions, contact: ind-modules@vishay.com www.vishay.com 3 110RKI...PbF/111RKI...PbF Series Vishay High Power Products Phase Control Thyristors (Stud Version), 110 A 140 130 120 O 140 Maximum Allowable Case Temperature (C) Maximum Allowable Case Temperature (C) 111RKI Series RthJC (DC) = 0.27 K/W 130 120 110 100 90 80 111RKI Series RthJC (DC) = 0.27 K/W O Conduction period Conduction angle 110 100 90 30 60 90 120 0 20 40 60 80 100 180 DC 90 30 60 120 180 80 70 0 20 40 60 80 100 120 120 140 160 180 Average On-State Current (A) Fig. 1 - Current Ratings Characteristics Average On-State Current (A) Fig. 2 - Current Ratings Characteristics 160 160 R th Maximum Average On-State Power Loss (W) Maximum Average On-State Power Loss (W) 140 120 100 80 60 O 140 120 100 80 60 40 20 0 0. 0. 1 8 6 SA K/ = W 3 0. 180 120 90 60 30 K/ K/ W K/ W W R - RMS limit 1.5 K/W 2 K/ W 40 20 0 Conduction angle 111RKI Series TJ = 140 C 0 20 40 60 80 100 120 4 K/W 5 K/W 0 20 40 60 80 100 120 140 Average On-State Current (A) Fig. 3 - On-State Power Loss Characteristics Maximum Allowable Ambient Temperature (C) 220 200 220 Maximum Average On-State Power Loss (W) Maximum Average On-State Power Loss (W) 180 160 140 120 100 80 60 40 20 0 DC 180 120 90 60 30 R th S A 200 180 160 140 120 100 80 60 40 20 0 = 0. 3 K /W R - RMS limit O Conduction period 111RKI Series TJ = 140 C 0 20 40 60 80 100 120 140 160 180 /W K/W 1K /W 1.5 K/W 2 K/W 0.8 0.6 K 4 K/W 5 K/W 0 20 40 60 80 100 120 140 Average On-State Current (A) Fig. 4 - On-State Power Loss Characteristics Maximum Allowable Ambient Temperature (C) www.vishay.com 4 For technical questions, contact: ind-modules@vishay.com Document Number: 94379 Revision: 11-Aug-08 110RKI...PbF/111RKI...PbF Series Phase Control Thyristors (Stud Version), 110 A 2000 1800 Vishay High Power Products Peak Half Sine Wave On-State Current (A) Peak Half Sine Wave On-State Current (A) 1600 1400 1200 1000 800 At any rated load condition and with rated VRRM applied following surge Initial TJ = 140 C at 60 Hz 0.0083 s at 50 Hz 0.0100 s 2500 Maximum non-repetitive surge current versus pulse train duration. Control of conduction may not be maintained. Initial TJ = 140 C No voltage reapplied Rated VRRM reapplied 2000 1500 1000 111RKI Series 500 111RKI Series 10 100 0.01 0.1 1.0 10 1 Number of Equal Amplitude Half Cycle Current Pulse (N) Fig. 5 - Maximum Non-Repetitive Surge Current Pulse Train Duration (s) Fig. 6 - Maximum Non-Repetitive Surge Current Instantaneous On-State Current (A) 10 000 TJ = 25 C 1000 TJ = 140 C 100 10 111RKI Series 1 0 1 2 3 4 5 Instantaneous On-State Voltage (V) Fig. 7 - On-State Voltage Drop Characteristics 1.0 ZthJC - Transient Thermal Impedance (K/W) Steady state value RthJC = 0.27 K/W (DC operation) 0.1 0.01 111RKI Series 0.001 0.0001 0.001 0.01 0.1 1.0 10 Square Wave Pulse Duration (s) Fig. 8 - Thermal Impedance ZthJC Characteristic Document Number: 94379 Revision: 11-Aug-08 For technical questions, contact: ind-modules@vishay.com www.vishay.com 5 110RKI...PbF/111RKI...PbF Series Vishay High Power Products Phase Control Thyristors (Stud Version), 110 A 100 Instantaneous Gate Voltage (V) 10 Rectangular gate pulse a) Recommended load line for rated dI/dt: 20 V, 30 tr 0.5 s, tp 6 s b) Recommended load line for 30 % rated dI/dt: 15 V, 40 tr 1 s, tp 6 s TJ = 25 C (1) PGM = 12 W, tp = 5 ms (2) PGM = 30 W, tp = 2 ms (3) PGM = 60 W, tp = 1 ms (4) PGM = 200 W, tp = 300 s (a) (b) TJ = 40 C TJ = 140 C 1.0 (1) (2) (3) (4) VGD 0.1 0.001 IGD 0.01 Device: 111RKI Series 0.1 1.0 Frequency limited by PG(AV) 10 100 1000 Instantaneous Gate Current (A) Fig. 9 - Gate Characteristics ORDERING INFORMATION TABLE Device code 11 1 1 2 3 4 5 0 2 - RKI 3 120 4 PbF 5 IT(AV) rated average output current (rounded/10) 0 = Eyelet terminals (gate and auxiliary cathode leads) 1 = Fast-on terminals (gate and auxiliary cathode leads) Thyristor Voltage code x 100 = VRRM (see Voltage Ratings table) Lead (Pb)-free LINKS TO RELATED DOCUMENTS Dimensions http://www.vishay.com/doc?95003 www.vishay.com 6 For technical questions, contact: ind-modules@vishay.com Document Number: 94379 Revision: 11-Aug-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1 |
Price & Availability of 110RKI80PBF
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |